Industry survey shows switch to low-sulphur fuel has not been without problems

Overview

The maritime industry’s transition to the sulphur regulation from the International Maritime Organization (IMO) which came into force on 1 January 2020 has not been without problems. Since fuel oil properties are fluctuating, it is expected that quality and safety problems will continue to be a challenge for the global shipping industry.

BIMCO, International Chamber of Shipping (ICS), INTERCARGO and INTERTANKO have published the results of an industry survey aimed at getting an overview of how the industry has experienced the transition to using compliant low-sulphur fuel oil from 1 January.

The survey was launched on 24 February 2020 and ended on 6 May 2020, and the main focus of the survey is on problematic properties of the IMO 2020 compliant fuel oil that can lead to issues. 

“The survey gives us valuable insight into the magnitude and nature of problems encountered by the industry in the transition to using low-sulphur fuel oil. The industry had widespread experience with how to manage heavy fuel oil, and the survey provides insight into which parameters of the new fuel types are posing the biggest challenges for onboard fuel management,” says Christian Bækmark Schiolborg, Manager, Marine Environment at BIMCO.

The survey focuses on potential problems such as increased sludge discharge, clogging of fuel pipes, preheaters, fuel separators and fuel filters, fuel pumps getting stuck, problems with fuel injection and poor ignition of fuel oil. It also focuses on other issues regarding incomplete combustion, wax appearance and increased wear and tear of cylinder liners. These are problems that may lead to loss of propulsion and/or black out.

The survey indicates global challenges with fuel characteristics and limits being off specifications most frequently when it comes to total sediment, aluminium plus silicon, pour point, ash, flash point, acid number and viscosity.

It also indicates that most common operational problems experienced are increased sludge deposits and wax appearance after switching to the compliant fuel oils with a sulphur content not exceeding 0.50%. 

Lastly, the survey indicates that when commercial fuel oil samples are tested after bunkering, sulphur content is among the most frequent parameters to be indicated as off specifications and consequently, an indication of potential non-compliance with MARPOL annex VI.

For further information, please contact:

BIMCO:
Christian Bækmark Schiolborg
Manager, Marine Environment
cbs@bimco.org

International Chamber of Shipping (ICS):
Sunil Krishnakumar
Senior Technical Advisor
Sunil.krishnakumar@ics-shipping.org

INTERCARGO:
Ed Wroe
Technical Manager
ed.wroe@intercargo.org

INTERTANKO:
Gilyong Han
Senior Manager Technical
gilyong.han@intertanko.com

Download RELATED Documents

  • Download Icon

    2020 Fuel Oil Quality and Safety Survey Report 1.5 MB

    Download now
Mette Kronholm Frænde
in Copenhagen, DK

Coronavirus

Access BIMCO's COVID-19 related articles and advice.

Read more

 

Latest Related News

No related news was found

View All News
 

ELSEWHERE ON BIMCO

Contracts & Clauses

All of BIMCO's most widely used contracts and clauses as well as advice on managing charters and business partners.

Learn about your cargo

For general guidance and information on cargo-related queries.

More about cargo

BIMCO Publications

Want to buy or download a BIMCO publication? Use the link to get access to the ballast water management guide, the ship master’s security manual and many other publications.